Canon 5d Mark Ii Software Download for Mac Updated

Canon 5d Mark Ii Software Download for Mac

This section describes how to connect the photographic camera to a computer when importing images to the figurer or specifying the camera settings from the calculator.

Note

Before connecting the camera to a estimator, please install the EOS Utility software from the EOS Digital Solution Disk included with your camera. For more information on the installation procedure, delight refer to
rn:answer_xref title="Installing the Software from the EOS DIGITAL Solution Disk (Included on the CD-ROM or Downloadable from the Canon Homepage)" answer_id="${content_link}8200748900" contents="Installing the Software from the EOS DIGITAL Solution Disk (Included on the CD-ROM or Downloadable from the Canon Homepage)" target="_self" />.

Employ the supplied USB cable to connect the camera to the computer.

Kickoff the calculator earlier making the connection.

To prevent disconnection while saving images to the computer or performing data transfer operations, using the AC adapter kit ACK-E6 (sold separately) as the photographic camera's power supply while the camera is connected to the computer is recommended.

1. Confirm that the camera is non continued to the computer, and so set the camera's power switch to < >(Quick Command Dial).

2. Press the <MENU> button to display the menu.

iii. Change the camera'south Auto ability off settings. When the Car Power Off setting is activated, the photographic camera may plough off automatically when connected to other devices. As connections will exist ended if the camera turns off, please make certain to deactivate the Auto Power Off setting before making connections.

iii-one. Plow the <Principal Dial> to select the [ ] tab, and then turn the <Quick Control Dial> to select [Auto power off].

three-2. Press the <Ready> button and plough the <Quick Control Dial> to select [Off] from the menu that appears, then press the <SET> push button again.

Please refer to the Didactics transmission supplied with your photographic camera for more data about the Automobile power off settings.

4. Press the <Carte> button and turn off the brandish on the LCD monitor, and then turn the camera's ability switch to <OFF>.

5. Plug the supplied USB cable into the USB port on your computer. The port'due south location differs between computers. Please refer to the documentation provided with your reckoner for more information.

6. Connect the other end of the USB cable to the <DIGITAL> terminal on the camera.

vii. Plough the camera's power switch to <ON>.

8. EOS Utility opens and the communications betwixt the photographic camera and the reckoner commencement.

If EOS Utility does not start automatically, click the [Showtime] push button (or button), and then select [All Programs], [Canon Utilities], [EOS Utility], and then [EOS Utility]. If you use Mac OS X, click the [EOS Utility] icon registered in the Dock.

The message that appears on the screen differs depending on the computer's operating system or software installed in the computer, and also depending on whether the camera is being connected to the estimator for the first time or has been connected previously.

If a window to select a program (application) appears, select [Catechism EOS Utility], and so click [OK]. (If you utilize Windows Vista, select [Downloads images EOS camera].)

For information near operations after connecting the camera to the calculator, please refer to the links in the related data section below.

This completes the process of connecting the camera to the estimator.